Designer II

  1. Installation Rails

    1/2" plywood glued and stapled to the back and I-beam brace.

  2. Face Frame

    3/4" x 1 3/4" kiln dried oak, maple and cherry stiles and rails, joined with wood screws

  3. Tops & Bottoms

    1/2" Maple plywood with UV clear coat interior.

  4. Drawer Guides

    75 lb capacity dual undermount 3/4" extension, epoxy coated, wide track wheels with self closing feature. Installed with plug-in adjustable rear brackets for positive placement and stability. Lifetime Warranty

    (upgrade to Blumotion Drawer guide) 75 lb capacity dual undermount full extension with soft close for dovetail drawers only. Lifetime Warranty.

  5. Backs

    3/16" Maple plywood with UV clear coat.

  6. Shelves

    Adjustable, 3/4" Maple plywood with UV clear coat, front edge is maple edgebanded. Base cabinet shelves are 1/2" depth of cabinet.

  7. End Panels

    1/2" Maple plywood with UV clear coat interior. Exterior veneer matches face frame wood species and is finished to match when finished end is specified.

  8. Toe Space

    1/2" x 4 1/2" plywood on base cabinets.

  9. Drawer

    Full length, four-sided, 5/8" solid wood with 3/16" plywood bottom grooved into four sides. Dovetail joinery on four sides.

  10. Hinges

    • FAD Hinge: 1 9/16" overlay; 6 way adjustable, concealed cup hinge, 110° opening. Lifetime Warranty
    • AD Hinge: 1 3/8" overlay; 6 way adjustable, concealed cup hinge, 110° opening. Lifetime Warranty
    • HAD Hinge: 1/2" overlay 6 way adjustable, concealed cup hinge, 110° opening. Lifetime Warranty
    • NAD Hinge: 2-way adjustable, concealed cup hinge, 108° opening. Lifetime Warranty
    • NEW! ISC Hinge: soft close integrated into the hinge cup, 110° opening. Lifetime Warranty

  11. I-Beam Braces

    1/2" plywood dadoed, glued and stapled into face frame and end panels and then stapled to back panel & nailer.

All Wood Construction